Thru-feed carcase press

Description

New machine
Make: ERREGI
Type: Tecnopress VR2/2

Fast - Silent - Clean - Lean - Universal - Service by Wehrmann

Technical data:
 
Self-positioning thru-feed carcase press
 
- Motorized vertical and horizontal  pressure beam adjustment. 
 
- The horizontal pressure beams are equipped with pneumatically controlled pressure bars. 

  Their position is programmable. 
 
- High precision linear guides allow the movement of  the top pressure beam and the vertical pressure beam. The power is transmitted by hard-wearing belts with steel core. Steady pressure built-up independent of the case dimensions. 
 
- Two welded tubular steel frames take distribute the clamping load in a unique way which gives even pressure from all 4 sides. 
 
- The workpiece transport thru the press by a transport belt with frequency-regulated motor 
 
Operating Cycle: 
Stacks of panels representing units are presented on the pre-assembly buffer zone to the assembly station. 
One or two operators (depending on size and speed) assemble the unit and start the cycle by unloading the unit into the clamp. 
The clamp reads the dimensions of the unit and positions it in the clamp. 
The clamping cycle starts in the selected mode. 
The clamping pressure and the pressing time is programmable. 
Having finished the clamping cycle the case clamp is smoothly moved out to the receiving roller conveyor to allow the glue to cure. 
 
technical details: 
max. workpiece height: 1.200 mm 
min workpiece height: 250 mm 

min workpiece length: 250 mm 
max. workpiece depth: 700 mm 
clamping pressure: 50 - 1.300 kg 
feed speed: 10 - 40 m/min 
connected load: 380 V / 50 cycles 
installed power: 6 kW 
compressed air: 6 bar
 
- with optical safety barriers on the front and rear of the clamp 
- pre-assembly conveyor belt , belt width 720 mm, belt length 2.500 mm with frequency-controlled  drive 10 - 40 m/min.