New machine, immediately available from our show-room!
Questions about this machine
Workpiece length: 300-2.600 mm
Workpiece width: 300-1.350 mm
Workpiece thickness: 200-700 mm
Electromechanical carcase press
Simplified execution with a pre-programmed press mode.
The vertical pressing surface consists of seven press lamellas
(150 x 50 mm).
The horizontal pressing surface consists of six press lamellas (150 x 50 mm).
The simultaneous hitting of the horizontal and vertical pressing surfaces on the body of the carcass enables a faster and more even pressing process.
40 mm Ø ball screws and linear guides ensure a high pressing force and rigidity
(separate drive motors with 1.5 kW each).
Positioning speed of the press elements: 29 mm/sec.
Max. workpiece length: 2.600 mm
Max. Workpiece width: 1.350 mm
Max. Workpiece thickness: 700 mm
Max. pressing force
Horizontal: 1.800 kg
Vertical: 2.300 kg
Working height: 420 mm
Pressing force adjustable by potentiometer.
The operating panel is equipped with a joystick for quick and easy
positioning of the pressing surfaces.
2-hand operation during positioning.
With CE package
Operating instructions: German
Machine labeling: German
Electrical connected load: 400 V, 50 Hz, 3 phases
Voltage fluctuations: max. + 6 % to - 10 %
In case of on-site fuse protection via RCD, an all-current sensitive
(R CCB, type B) earth leakage circuit breaker with
a rated residual current >/=300 mA must be used.
Ambient temperature at the installation site:
min. 10° C (50° F)
max. 35° C (95° F)
Sales East Europe & Asia
Sales Swiss & International
Sales Belgium, Netherlands, Luxembourg & Scandinavia