8 / 27

Double mitre saw

Double mitre saw / EISELE / LMS-D/76Double mitre saw / EISELE / LMS-D/76Double mitre saw / EISELE / LMS-D/76Double mitre saw / EISELE / LMS-D/76Double mitre saw / EISELE / LMS-D/76
Double mitre saw / EISELE / LMS-D/76Double mitre saw / EISELE / LMS-D/76Double mitre saw / EISELE / LMS-D/76Double mitre saw / EISELE / LMS-D/76Double mitre saw / EISELE / LMS-D/76
BrandEISELE
typeLMS-D/76
stateUsed
Price (plus VAT.)€ 2950
stock number0030773
year1976
- for straight and vertical mitre cuts
- for cutting aluminium and plastic profiles
- Cut-off length: max. approx. 6000 mm


Price: 2,950.00 EUR + VAT
Questions about this machine
Double mitre saw
Brand: Eisele
Type: LMS-D/76
Year: 1976


Two 3 kW three-phase motors 2800 m/-1 drive shaft motor
Individual switching of both motors protected by motor protection switch.
Saw blade Ø: max. 400 mm
Infinitely variable
6 - 7 bar
Air consumption: approx. 12 Nl per drive stroke (One working stroke: forward/backward and tension)
Workpiece clamping: Two clamping cylinders horizontal, one clamping cylinder vertical, plastic pressure pads
Length adjustment: Second saw unit by hand with quick clamping.
Dimensional adjustment: Easily readable nonie with fine adjustment.
Cutting length: For internal and external dimensions
Saw blade: 2800 rpm
cutting speed: 58 m/sec (400 mm saw blade Ø)
RAL 6011 Hammerblow green

- for straight and vertical mitre cuts
- is particularly suitable for cutting aluminium and plastic profiles
(for facades, doors, windows and shop fitting)
Cut-off length: max. approx. 6000 mm
The design is so robust that maximum continuous output can be achieved without any significant maintenance.

Circular saw blade cuts from top to bottom.

Operation:
The controls are in the switch box.
The pneumatic and electric control units are separated from each other by a partition wall and a separate door in the switch box. For vertical swivelling to 45°, the clamping levers on the swivel box are released and the units are swivelled to the stop with one hand. The entire machine is designed with fixed stops at 45 ° and 90°, whereby an exact adjustment is always possible. Intermediate degrees are adjustable according to scale. The length adjustment can be set and read off within seconds and effortlessly by means of a fine adjustment.

Safety:
The clamping of the workpiece horizontally and vertically provides maximum clamping safety. Free falling of the material remnants prevents jamming and ejection.

Drive:
The drive is provided by two 3 kW motors, where the saw blade holder is directly flanged on. The motors are each protected against excessive loads with a motor protection switch.

Swivel boxes:
Both sawing units are mounted on swivel boxes. The left unit and swivel box are rigidly connected to the substructure. On the right side, the unit and the swivel box can be moved. This unit runs on 4 ball bearing prismatic rollers which are eccentrically mounted and can be adjusted to the correct height at any time.
The respective stud bolts must be loosened and the eccentric axes turned with a large screwdriver until the correct position is reached. In front of the prism rollers, there are wiper brushes on both sides of the base plate which prevent the round shafts and rollers from getting dirty and guarantee a trouble-free run.


Note:
The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.




Contact person

Klaus-Dieter B├╝scher
Sales Belgium, Netherlands, Luxembourg & Scandinavia