sanding machine

Sanding machine
Brand: SCM
Type: DMC System / E83 2000
Year of manufacture: 2022

Technical data
Position 1
RC 250-2620 Work unit for rollers with a diameter of 250 mm
- RA-250 steel groove roller
- Timer-controlled oscillating blowers for cleaning the abrasive belt
- 22 kW motor
- PR-E pressure unit with 2 rubber-coated rollers at the unit’s inlet

Position 2
TIE-5000 processing unit for internal, pull-off cross-slide shoe
- PE 32T PWM3 electronic link shoe EPICS, pitch 32 mm with PWM3
- Motorized rotary blower
- Inverter-controlled motor, power up to 15 kW

Position 3
SC-2620 processing unit for superfinish sliding shoe
- PE 32/C PWM3 electronic link shoe EPICS, pitch 32 mm, with PWM3
- Time-controlled oscillating blowers for cleaning the abrasive belt
- Inverter-controlled motor, power up to 15 kW

Position 4
BSH 250 work unit for texturing roller with a diameter of 250 mm
- STY 250 brush roller with a diameter of 250 mm, featuring Tynex bristles with a diameter of 1.27 mm
- Pneumatic on/off control for the brush roller
- Inverter-controlled motor with 11 kW

At the outlet
SP/U 200 work unit at the outlet for cleaning rollers with a diameter of 250 mm
- SPC 200 brush roller with a diameter of 200 mm
- Motor with 1.1 kW
- Timer-controlled rotary blower for workpiece cleaning at the outlet of the brush unit



Note:
The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.