- Cutting width 2200 mm
- With IR preheating zone and cooling unit

Oil application line consisting of:
- RBO vacuum feeding Tornado SC 1300
- HEESEMANN MFA 8 (cross-lengthwise-lengthwise brushes)
- HEESEMANN - Dust removal machine
- Plus  additional dust removal
- BÜRKLE SLC 1400 - Roller application machine
- Distributor brush machine with air nozzles from above
- BÜRKLE SLC 1400 - roller application machine
- Distributor brush machine with air nozzles from above
- HACKEMACK slot nozzle dryer
- RBO - vacuum stacker

- Workpiece length: 800 - 3000 mm
- Workpiece width: 350 - 1400 mm
- Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling
- Main spindle 12 kW
- 18-position disk changer

- Volume flow: 6927 m3/h
- Negative pressure: 2400 Pa
- Main motor: 11 kW
- Air system: Negative pressure

- Work table: 4000 x 2100 mm
- High-frequency spindle 2.2 kW
- Beamicon2 control software
- Smart WOP
- Smart WOP panel planner

- Jointing unit, 2 x 2.2 kW
- Gluing unit
- end trimming unit, bevel/straight, 2 x 0.18 kW
- Multi-stage trimming unit
- Contour  trimming unit, 1 x 0.35 kW
- multi scraping unit
- Flat scraper
- Buffing unit

- max. vertical cut : 5200 mm
- highest horizontal cut: 2100 mm
- max. cut depth: 80 mm
- motor power: 7,5 hp (5,6 KW)

- Veneer bundle length (grain direction): 400 - 4000 mm
- Veneer bundle widths (cross grain direction): 45 - 515 mm
- Veneer bundle thickness: approx. 10 - 40
- Throughput speed: approx. 27 m/min.

- Veneer bundle lenght (grain direction): 400 - 4000
- Veneer bundle widths (cross grain direction): 45 - 515 mm
- Veneer bundle thickness: approx. 10 - 40 mm

- Cutting width: 800 mm
- Insertion height: 70 mm
- Weight: approx. 1100 kg

- max. cutting opening: 1060 x 75 mm
- external dimensions of machine: 1700 x 700, height 1700

- Veneer face lengths (grain direction): 400 - 2800 mm
- Veneer face widths (cross grain direction): 400 - 4200 mm
- Veneer thickness (trimming and reinforceing mode): 0,3 - 1,5 mm
- Veneer thickness (reinforcing mode only): 0,3 - 2,0 mm
- Trim-off widths (each side): 10 - 350 mm

- Veneer face lengths (grain direction): 420 - 2800 mm
- Veneer face widths (cross grain direction): 400 - 4200 mm
- Veneer thickness (trimming and reinforcing mode): 0,3 - 1,5 mm
- Veneer thickness (reinforcing mode only): 0,3 - 2,0 mm
- Trim-off widths (each sids): 10 - 350 mm

Working height
- Longitudinal cutting range: 970 mm
- Cross-cutting range: 970 mm

Cutting length
- Longitudinal cutting range: 3200 mm
- Cross-cutting range: 2440 mm

Saw blade overhang
- Longitudinal cutting range: 130 mm
- Cross section: 130 mm

- Release agent application top and bottom
- Scoring saw with 2.2 kW motor
- Rough trimming unit with 8.0 kW motor
- Double milling unit with 2 motors, each 4.5 kW
- Gluing unit for hot-melt adhesive
- End trimming unit
- Flush milling unit
- Multifunction unit
- Multi-profile scraper unit
- Spray nozzles top and bottom
- Flat scraper unit
- Buffing unit
- Grooving unit

- 3-axis machining
- Computer new in 12/2023
- New axis control in 2018
- Working size: approx. 120 x 280 cm
- main spindel 8,0 KW
- 12-slot changer

- Veneer strip lengths (grain direction): 350 - 2150 mm
- Veneer strip widths ( cross grain direction): 50 - 600 mm
- Veneer face width (cross grain direction): min. 260 mm
- Veneer strip thickness: 0,3 - 1,5 mm

- Cutting length: 2810 mm
- Insertion height: 80 mm
- Cutting range: 20 - 470 mm
- Drawing motion of knives approx.: 20°

- Max. cutting length: 2600 mm
- Cutting widths: 45 - 350 mm
- Pressure beam opening: 100 mm
- Pressure beam width: 350 mm
- Parallel fence with digital read-out: 25 - 1000 mm
- Cutting angle approx.: 45°

- Veneer strip lengths (grain direction): 350 - 1500 mm
- Veneer strip widths (cross grain direction): 50 - 500 mm
- Veneer strip thickness: 0,3 - 1,5 mm

- Veneer strip lengths (grain direction): 350 - 1500 mm
- Veneer strip widths (cross grain direction): 50 - 500 mm
- Veneer face width (cross grain direction): min. 260 mm
- Veneer strip thickness: 0,3 - 1,5 mm

Lacquering of narrow edge surfaces
Put into operation: 2021
Purpose: to spray edges of furniture panels located in stacks.

Specifically designed for the precise cutting and processing of wooden components in timber construction and carpentry.
Functions of the K2-5-450:
- Automatic crosscutting (cutting to length)
- Milling, drilling, and slotting
EXW-Price: 85,000 EUR

Consisting of:
- Infeed unit
- 1. Throughfeed Drilling Machine
- 2. Throughfeed Drilling Machine
- Stacking Unit

- Jointing cutter
- Radiant heater
- EVA gluing unit
- Roll magazine for edge material
- Cutting unit
- Flush milling top/bottom
- MFA with 2 motors for radius r2, servo-controlled
- Profile scraper unit
- Surface scraper unit
- Buffing unit
- Feed speed 20 m/min

- premilling unit
- gluing unit
- Pre-melting unit
- end cutting unit
- tiltable trimming unit
- rounding unit
- edge scraping unit
- brushing unit

- working withd 1.350 mm
- Belt feed speed 2 to 16 m/min
- PRO SAND electronic control

Year of manufacture: 2014
Maximum edge band thickness: 8 mm
Belt top pressure: Yes
Units controled: Pneumatic
Machine length: 6,760 mm

For door dimensions:
- Lengths: 1,800 - 2,300 mm
- Widths: 500 - 1,300 mm
- Thicknesses: 35 / 40 / 44 mm

Panel size: 5,500 x 1,600 mm
Maximum pressing force: 160 tons