Panel dividing saw

Panel dividing saw
Brand Holzma
Type: HPP 380/43/43/L

Year of construction: 2007


Automatic panel dividing saw for tear-free and dimensionally accurate dividing of
coated and uncoated panels made of wood-based materials and such,
which are to be processed like wood-based materials.


Technical data:

Saw blade projection 95 mm
Saw carriage feed:
forward 1-130 m/min
backwards constant 130 m/min
Program slide speed:
forward 80 m/min
backwards 80 m/min
(in EU countries forward = 25 m/min)
Automatic pressure bar height control yes
Automatic cutting height control yes
Adjustable pressure bar contact pressure yes
Adjustable clamp pressure yes
Fully covered machine table (saw body) yes
Angular pressure device
min. pressure width 0 mm
max. pressure width complete cutting length
Main saw motor 18.0 kW
Scoring saw motor 2.2 kW
Operating voltage 400 V / 50 Hz
Electrical connection value for HS motor:
18.0 kW = 24 kW
21.0 kW = 27 kW
Working height 920 mm
Paintwork textured paint gray RDS 240 80 05
Main saw blade 380 x 4.4 x 60 mm
Scoring saw blade 180 x 4.4 - 5.4 x 45 mm
Required air pressure 6 bar
Compressed air requirement 150 NL/min
V at the extraction nozzle approx. 26 m/s
Vacuum min. 1200 Pa
Exhaust air volume 4600 m³/h
Extraction connection chip channel 1 piece 200 mm
Extraction connection pressure beam 1 piece 150 mm

HPP 380/43/43
Cutting length 4300 mm
Cutting width (program slide travel) 4250 mm
Roller rail (10-track element) 1 piece
Roller rail (2-lane element) 5 pieces
Collets 7 pieces
of which the first 3 are double-fingered,
all others single-finger
Pitch 75/275/475/1050/1850/2650/3450 mm
measured from the angle ruler to the center
Collet chuck
2 additional two-finger collets possible
Item 175/375 mm
1 additional single-finger collet possible
Item 650 mm
4 manual trimming rakes on collets
Pos. 75/475/1050/2650 mm
Air cushion table with roller element
2160 x 650 mm 4 pieces
Central blower 1 piece
Nozzle spacing of the air cushion tables 70 x 70 mm

Angle cutting device (automatic)
Angle cuts faster and more precise than ever before, with patented angle cut clamp

Technical data
Max. panel thickness: 48 mm
Min. side length at 45°: 115 mm
Angular accuracy at 1000 mm: 0.1°
Min. cutting angle: 0.0°

Option 6085 'Angle cutting mask' required.

Grooving program (manual) Type 180/230/250/350/380
Grooving program with graphic input and sequence graphics.
Grooving depth manually adjustable.

Turbo grooving type 350/380/510/530/550/570
Longitudinal grooving with the main saw in feed and return.
Especially suitable for bent parts.
Note: Grooves in the return run are not 100% tear-free.
tear-free.

Cut-out/stress-free cutting program
Consisting of: - Cut-out program
- Insert grooves (option 6055 or 6050 required)
- Stress-free cutting (1-stage/2-stage/3-stage)
Positioning accuracy +/- 2 mm
Without hydraulic stop!

Labeling with part graphics
includes the following options:
1. graphic display of edge information.
(Only in conjunction with option no. 7001/7005/6075/6080)
2. graphical representation of processing drawings from Cut-Profi(t).
(Only in conjunction with option no. 7001/7005/7022/7025/6075/6080)
3. printout of parts drawings from higher-level systems.
(Only in conjunction with option no. 6200)

Etikettienprogramm 350/380/11/510/530/550/570/33
Label printing for finished parts directly on the saw.
- Printout optionally per piece, per package or
per definable stack

Label printer type PICA 104
Thermal / thermal transfer label printing station

Technical data
Label width: max. 110 mm
min. 15 mm
Print width: 104 mm
Resolution: 200 dpi
Print speed: 80 mm/sec
Core diameter (label): 40 mm
Roll diameter: max. 180 mm
Automatic dispenser: yes
Automatic rewinder: no
The printer is installed in a separate housing
in the area of the angle ruler.

CADMATIC angle cutting mask
For angle cuts, this software
software is used for automatic stop control,
so that time-consuming manual alignment of the material
material to the cutting line is no longer necessary.

Online data transfer + USB port
Data exchange via a network. Both the
network connection as well as the installation
of the network-specific drivers are carried out by
by the customer. A precise technical
clarification of the network connection between the
customer network and the Holzma saw is absolutely
(see network checklist).
(USB stick is not included in the scope of delivery)

Optimization software "CADplan JUST-IN-TIME"

Notice:
The technical data and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

The lifting device shown in the pictures is not included.