new CNC Drilling machine, ALBERTI

new CNC Drilling machine
Brand: Alberti
Type: Vector DH

6 controlled axes and two large drilling heads ensure high productivity on the Vector DH. This line can be fed manually or automatically.


Two machining heads, working from above
Manual or automatic loading and unloading with longitudinal workpiece transport
Monolithic frame in welded strong steel
Independent control of all axes with drilling and optional with fitting cycle optimization

6 independent axes
X workpiece transport along the X-axis with vacuum suction cup for autom. alignment
Y1 first machining head
Z1 control of machining depth, first machining head
Y2 second machining head
Z2 Machining depth control, second machining head
W lateral pressure control

Remark:
Max. Workpiece dimensions: 3000x1200x50mm
Min. workpiece dimensions: 300x130x12mm
Geometry of workpieces: Length > Width / Length = Width / Length < 20% Width.

Machining head 1 in L-shape with another workpiece clamping system.
- 20 vertical spindles:
9 vertical spindles, central in Y-direction
1 horizontal boring head with 2 outputs in X-direction with vertical clamping cylinders
9 vertical spindles, central in X-direction
1 horizontal drill head with 2 outputs in Y-direction with vertical clamping cylinders

Machining head 2 in L-shape with another workpiece clamping system.
- 20 vertical spindles:
9 vertical spindles, central in Y-direction
1 horizontal boring head with 2 outlets in X-direction with vertical clamping cylinders
10 vertical spindles, central in X-direction

working table:
- Driven PVC rollers at the inlet
Usable length: 2000mm, usable width: 840mm
- Reference table with PVC rollers
Usable length: 1000mm, working height: 920mm, adjustable +/- 30mm
- Powered PVC rollers at the outlet
Usable length: 2000mm, usable width: 840mm
- Vertical workpiece clamps, autom. adjusted to workpiece thickness
- Automatic zero point detection in X-direction at workpiece start and end
- Lamp to indicate workpiece clamping and machining mode
- Workpiece release for position correction

Angular unit

TPA Albatros Software


Optionally available at extra cost:

Drilling units:
Horizontal drilling heads: in X-direction, 2 exits and vertical workpiece clamps, drilling depth max. 50mm.
Horizontal drilling heads: in Y-direction, 2 outputs and vertical workpiece clamps, drilling depth max. 45mm
Monoblock 13 Vertical spindles in X-direction
Monoblock 15 Vertical spindles in X-direction

Inverter for high frequency aggregates

grooving saw in X-direction 1,8 HP, Ø 150mm

Grooving saw in X-direction and Y-direction 1.8 HP, Ø 150mm

7 HP electric spindle, 12,000-18,000 rpm, tool Ø 20mm, CPE holder, manually interchangeable
9 hp electrospindle,12.000-18.000 rpm, tool-Ø 20mm, HSK 63 F-taper, manual or automatic changeable

4-fold tool changer for tools with max. 40mm Ø

HSK 63F cone

C-axis

Uninterruptible power supply PC

PLC functions for control of autom. feeding and destacking

Preparation basic version for fittings
Preparation basic version for bearings
Preparation basic version for drawer runners

Dongle for offline editor functions

Barcode scanner

Additional vacuum suction cup for alignment