2 / 47

CNC processing centre IMA BIMA 310V 120/600

CNC processing centre / IMA / BIMA 310V 120/600CNC processing centre / IMA / BIMA 310V 120/600CNC processing centre / IMA / BIMA 310V 120/600CNC processing centre / IMA / BIMA 310V 120/600CNC processing centre / IMA / BIMA 310V 120/600CNC processing centre / IMA / BIMA 310V 120/600
CNC processing centre / IMA / BIMA 310V 120/600CNC processing centre / IMA / BIMA 310V 120/600CNC processing centre / IMA / BIMA 310V 120/600CNC processing centre / IMA / BIMA 310V 120/600CNC processing centre / IMA / BIMA 310V 120/600CNC processing centre / IMA / BIMA 310V 120/600
BrandIMA
typeBIMA 310V 120/600
stateUsed
stock number0401531
year2004
Questions about this machine
CNC processing centre
Brand: IMA
Type: BIMA 310V 120/600
Year: 2004


Technical data:
Machining area
- in X-direction without gluing 6000 mm
- in X-direction motor gluing 5000 mm
- in Y-direction 1200 mm
- in Y-direction with main spindle + WZ-Ø 20 mm 1300 mm

max. clamping height from
Upper edge of suction plate Z1 100 mm
max. workpiece thickness Z 2 depending on equipment/application

Worktable height: approx. 950 mm

1 main spindle with feed stroke pneum.
- Drive power: 12 kW in S-1 operation
- Tool holder: HSK F63, taper diameter =38 mm
- Tool feed: automatic
- Pull-in force: 11000 N
- Tool weight: max. 6 kg
- Direction of rotation: right/left rotation, programmable
- Speed range: stepless 1500 - 24000 rpm, programmable
- Drive: frequency-controlled three-phase motor
Spindle lubrication: unique factory grease lubrication
- spindle cooling: water cooling

1 CNC axis rotating 360 degrees

1 vertical drilling unit S21

Machine table consists of:
6 support arms, infinitely adjustable in X-direction, with one rear and one middle stop each, all stops program-controlled
6 sets of suction plates consisting of a total of
6 suction plates 114 x 159 x 100 mm
6 suction plates 125 x 75 x 100 mm
The support arms and suction plates can be individually positioned to the corresponding workpiece size.

Alternating field area:
without pendulum machining, without gluing: X = 2 x 2900 mm
Free space in the middle: X = 200 mm
without pendulum machining, with gluing: X = 2 x 2150 mm
Free space in the middle: X = 700 mm
with pendulum machining, without gluing: X = 2 x 2400 mm
Free space in the middle: X = 1200 mm
with pendulum machining, with gluing: X = 2 x 1700 mm
Free space in the middle: X = 1600 mm

Feed drive system Rapid traverse:
- X axis 100 m/min.
- Z axis 25 m/min.

Air pressure: 6 bar

Tool change magazine 18-fold
Tool coding: place-coded
Tool weight: max. 6 kg
Tool length: max. 150 mm
Tool Ø: max. 100 mm at full occupancy
max. 150 mm with free secondary places or nestings

Central connection for extraction
Mains voltage: 3/N/PE, 400/230 V, 50 Hz
1 vacuum pump 100 m3/h


Note:
The technical data and descriptions are copies of the order confirmation at that time. Data are for information and are not binding.

Contact person

Richard Brakweh
Sales Belgium, Netherlands, Luxembourg & Scandinavia