complete edge processing line

Used edge banding machine line
Brand: IMA
not rebuilt - without warranty


consisting of the following machines:

Feeding
Brand Meinert
Type P622-D/B
year of construction 2001

Technical data
- Loading of workpieces by means of gantry
- Maximum package height 1600 mm
- 2 - gauge traverse
- with pit

IMA double-sided longitudinal processing machine
Brand IMA
Type COMBIMA/II/R75/1135/V/R3
Year of construction 2001

Technical data
- Double hogger
- Jointing cutter
- 3 x grooving unit
- 6-compartment edge magazine
- Gluing with PUR or EVA bonding
- Flush trimmer
- Profile router F15°/F45°/R1/R2/R3
- Profile scraper F45°/R1/R2/R3
- Flat scraper
- Buffing
- 2 x grooving units

Turning station 90° from longitudinal to cross
- with rotating cone

IMA double-sided cross processing machine
Brand: IMA
Type COMBIMA/II/R75/1175/V/R3
Year of construction 2001

Technical data
- Protective milling cutter
- Double clamp
- 6-compartment edge magazine
- Gluing with PUR or EVA bonding
- Snipping unit 40m/min servo
- Flush trimmer one above the other
- Profile router F15°/F45°/R1/R2/R3
- KFA 30 linear drive up to 30m/min (year 2013), F15°/F45°/R1/R2/R3
- Profile scraper blades F45°/R1/R2/R3
- Flat scraper
- Buffing
- 3 x grooving units

Turning station 90° from cross to longitudinal
- with rotating cone

Stacking
Brand IMA
Type P 620 D/S - L(Q) - 2800(3000)/1400
Year of construction 2016

Technical Data
- Length: min. 266 mm max. 3000 mm
- Width: min. 236 mm max. 1400 mm
- Thickness: min. 10 mm max. 60 mm
- Max. Package height incl. underlay is 1600 mm
- Control station for component removal
- Wandres tornado brush
- Single-track cross beam for 1 - 4 parts next to each other
- 2 storage spaces for underlay material
- with pit

Workpiece parameters

Panel dimensions
- Thickness (mm) min. 10 to max. 43 (with edge)
- Length (mm) min. 270 to max. 3000
- Width (mm) min. 236 to max. 1400
- Base material Chipboard, MDF, honeycomb, OSB

General panel tolerances
- Length tolerance (mm) ± 0.2
- Width tolerance (mm) ± 0.2
- Thickness tolerance (mm) ± 0.2

Edge properties
- Melamine (mm) 0.3 to 0.6
- ABS (mm) 0.4 to 3.0
. Radius (mm) 1.0 - 1.5 - 1.7 - 2.0 - 3.0
- Chamfers Up to 2.0 mm 45° possible
- Edge protrusion (mm) min. 3.0 to max. 8.0

Runout protection plate
- Thickness (mm) 25
- Length (mm) 1500
- Width (mm) 1000

Note:
From a part length (or layer length) of > 1800 mm, two protective plates must be used one behind the other.



Note:
The technical data and descriptions are copied from the original order confirmation. Data is for information purposes only and is not binding.