5 / 11

Double-sided cutting, drilling and dowel inserting machine

Doppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTP
Doppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTPDoppels.Abläng- Bohr-und Dübeleintreibm. / KOCH / SBD-60-PTP
BrandKOCH
typeSBD-60-PTP
stateUsed
stock number0401695
year2003
- Sawing unit  with NC axis in Y direction
- 5 horizontal drilling spindles single jumping
- Dowel inserting für dowels 10 x 40 mm
- 2 vertical drilling heads each with 28 spindles
Questions about this machine
Double-sided cutting, drilling and dowel inserting machine
Brand: KOCH
Type: SBD-60-PTP

Year: 2003


- Sawing unit  with NC axis in Y direction
- 5 horizontal drilling spindles single jumping
- Dowel inserting für dowels 10 x 40 mm
- 2 vertical drilling heads each with 28 spindles


Workpiece dimensions:
Length 140 – 2500 mm
Width    40 – 550 mm ( when using magazine ) without magazine 600 mm
Thickness 12 – 55 mm


Width- and Height adjustment by NC control

Sawing station for workpieces width 560 mm
Frequency controlled
Sawblade jump from sawing line
Brass guide for a tear free cut

horizontal drilling station
Each side with  5 spindles single jumping

1 dowel inserting device for dowels 10 x 40 mm, with electronic glue control ELC

Vertical drilling station
With 2 separate drilling heads. Each drilling head with 28 single jumping spindles
2 horizontal drilling spindles for length side drilling in front and rear side.
1 grooving saw 0/90° swivable

2 workpiece center supports with automatic move down, NC controlled in X direction.


Note:
The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

Contact person

Richard Brakweh
Sales Belgium, Netherlands, Luxembourg & Scandinavia