single-sided edge banding machine

single-sided edge banding machine
Brand: IMA
Type: Novimat/Contour/I/G80/700/R3+
Year of construction: 2016

Single-sided automatic IMA edge banding and finishing machine. For edge banding and reworking of panel-shaped workpieces.

Technical data

Workpiece length
- min. workpiece length: 150 mm
- min. workpiece width: 65 mm
- min. workpiece thickness: 8 mm
- max. workpiece thickness: 60 mm

Edge material
- Paper, plastic (film only with additional equipment) and veneer
- min. height: 14 mm
- max. height 65 mm

Roll material
- min. thickness: 0.3 mm
- max. thickness 3 mm*
* Veneered edges limited possible up to max. 1.0 mm

Machine loading
Insertion table 63.152, approx. 500 x 500 mm

Joint trimming unit 08.379
- with 2 motors each 4.0 kW, 8800 rpm, 150 Hz, controllable

Radiator for preheating the edge of the workpiece

Gluing unit VTG for gluing straight edges up to max. 3 mm
-Pneumatically controllable cutting blade for cutting the edge material for workpiece thicknesses up to 60 mm

Pre-melting container approx. 1 l, 283.201
controlled, with a heating capacity of 3 x 400 W for melting capacity
- with EVA-filled adhesive: approx. 7.0 kg/h
- with filler-free adhesive: approx. 5.0 kg/h
with automatic granulate feed 283.19
from a storage tank: approx. 30 kg
via a suction line into the melting chamber with level control

6-fold edge magazine for roll material 0.3 - 3 mm thick and max. workpiece thickness 60 mm

Automatic PU melting system Quickmelt 283.203
assigned directly to the adhesive container via a sliding device, with a cap on the melting outlet and a level control for the application basin, for 2 kg cans,
Melting capacity approx. 8 - 10 kg

Pre-milling unit 08.055.0.1680
- for pre-milling the upper edge overhang
- with 1 milling motor 1850 W, 400 V, 200 Hz, 12000 rpm

Snipping unit 08.42 / 30 / 8
- Pneumatic tilting 0+25° for straight and bevel cross-cuts
- Automatic adjustment to the feed speed 20 + 30 m/min
- with 2 motors, 660 W, 200 Hz
- Max. working speed: 30 m/min with edge cross-section 3 x 45 mm

Multiple profile trimming unit 08.0587 with 2 motors
for trimming 4 profiles, with cutting motor axes for horizontal and vertical positioning, for profiling/bevel trimming from above and below
- with 2 milling motors 1000 W, 400 V, 200 Hz, 12000 rpm

KFA x20 contour trimming unit
for profiling the front and rear workpiece contour
- 1 motor 180 W, 400 V, 200 Hz, 12000 rpm
- Workpiece thickness: 8 - 60 mm
- max. working speed: 20 m/min

Multiple profile scraper unit 08.516
with stepper motor axes for horizontal and vertical positioning, for fine processing of an upper and a lower quarter-circle profile on plastic edging materials, scanning from above and below (max. 3 profiles)

Scraper unit 08.521

uffing unit 08.617-2
- with a lower and upper motor 180 W, 50 Hz, 1400 rpm

Standard routing unit 08.190, for grooving/rebating and profiling
- 1 milling motor 4.5 kW, 150 Hz, 9000 rpm incl. frequency converter with brake function
- a manual 90° swivel device from 180°-270

NC axis for vertical adjustment

NC axis for horizontal adjustment


Note:
The technical data and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding