drilling and assembly line P+H

drilling and assembly line
Brand: Priess u. Horstmann
year of construction: 2000


Portal loading system PBA-52M
Pitless, for placing coated workpieces (sides and bottoms) in front of two drilling and assembly machines.
The basic machine consists of a solid, torsion-resistant frame with precision guides for holding the units

Electrical connection:
Separate switch cabinet for feeding flange-mounted on a column of the gantry. Electrical connection to the downstream drilling and assembly system.
Electrical connection 400 V +/- 10%, 50 Hz (3 phases with loadable neutral conductor), 4 KW. In accordance with VDE0100-T482, the system must be protected by an RCD on site

Compressed air connection:
via drilling and assembly system

Paint finish:
Machine and control cabinet pebble gray (RAL 7032)
Protective grille and supports fire red (RAL 3000)
Motors matt black (RAL 9005)
Electrical, pneumatic and other purchased elements according to P+H standard

Workpiece dimensions:
Workpiece length: 2 x 300 mm 2 x 1000 / 1x 2350 mm
Workpiece width: 300 mm 700 mm
Workpiece thickness: 16 mm 25 mm
Stacking height: max. 1200 mm (300 - 1500 mm) the customer must ensure sufficient stability
Stacking height: approx. 900 mm
Total height: approx. 4000 mm

Stacking pattern:
For short parts up to approx. 1000 mm in length, two parts in a row, long parts always stacked one on top of the other. Stop edge in throughfeed direction on the right, stacked flush right on protective plates.
Shelves are stacked in the middle. Stacking roller conveyors provided by the customer.

Performance:
Matched to the drilling and assembly system


BMA-DLS-CNC drilling and assembly system
for the commission-based production of sides. Drilling for construction holes, running rails, shelf supports, connecting fittings, mounting plates, cabinet hangers, etc.
The fittings can also be pressed in automatically. Feeding via magazine or vibratory conveyor.
The basic machine consists of a solid, torsion-resistant frame with precision guides to accommodate the units.
Control cabinet for the machine control (electro-pneumatic control) can be set up separately (cable length approx. 2 m)

Electrical connection:
400 V +/- 10%, 50 Hz (3 phases with loadable neutral conductor), approx. 13 KW

Maintenance unit:
R 1/2” with pressure switch and air reservoir, operating pressure 6-7 bar. Supply line min. 1”

Extraction:
min. 32 m/sec air speed at the respective nozzles of the units (required negative pressure 2200 Pa.)

Paint finish:
Machine pebble gray (RAL 7032)
Supports and protective grille fire red (RAL 3000)
Switch cabinet pebble gray (RAL 7032)
Motors and extraction hoods matt black (RAL 9005)

Workpiece dimensions:
Length: 2 x 250 mm 2 x 1000 mm / 1 x 2500 mm
Width: 200 mm 700 mm
Thickness: 16 mm 25 mm
Beveled sides only 16 mm. The ratio of part width to part length should not exceed 1:1. If the parts are stacked neatly, a 257x555 part is possible with restrictions.

Working height:
950 mm

Cycle times:
Infeed and outfeed with alignment: approx. 5-7 sec.
per drilling cycle and approx. 200 mm travel: approx. 2 sec
per press-fit cycle: approx. 3 sec

BAD-DTW-CNC drilling and assembly system
for the commissioned processing of floors in longitudinal throughfeed (indexed workpiece). Drilling, gluing and pressing of wooden dowels into the front edge at the top and bottom. Drilling and pressing in of
plinth feet and additional drilling in longitudinal throughfeed.
The basic machine consists of a solid, torsion-resistant frame with precision guides to accommodate the units.
Control cabinet for the machine control (electro-pneumatic control) can be set up separately (cable length approx. 2 m)

Electrical connection:
400 V +/- 10%, 50 Hz (3 phases with loadable neutral conductor), approx. 20 KW

Maintenance unit:
R 1/2” with pressure switch and air reservoir, operating pressure 6-7 bar. Supply line min. 1”

Extraction:
min. 32 m/sec air speed at the respective nozzles of the units (required negative pressure 2200 Pa.)

Paint finish:
Machine pebble gray (RAL 7032)
Supports and protective grille fire red (RAL 3000)
Motors and extraction hoods matt black (RAL 9005)

Workpiece dimensions:
Length: 218 mm 1600 mm
Width: 147 mm 700 mm
Thickness: 16 mm 25 mm

Working height:
1000 mm

Cycle times:
Infeed and outfeed with alignment: approx. 5-7 sec.
per drilling cycle and approx. 200 mm travel: approx. 2 sec
per press-in cycle: approx. 3 sec
60 mm base drilling, gluing and doweling as well as 4 base feet drilling and pressing in approx. 35 sec.

Feeding and buffer section
1 buffer section to the press system designed as an angular transfer. In detail consisting of:
- 1 roller conveyor behind the floor machine with round belt drive. Driven by 2 geared motors (0.55 kW) with frequency converter, v=50 m/min at 50 Hz. Useful width 700 mm.
Length of roller conveyor approx. 2500 mm. Overall height 1000 mm +/-30 mm. Rollers D=60 mm with plastic coating, D=125 mm
- 2 driven cross conveyors, each with 8 toothed belts, pitch adjusted to your side lengths. Drive with geared motor (2x 0.55 kW) and frequency inverter, v=40 m/min at 50 Hz Center distance 1500 mm each, overall dimension in transverse direction: adaptation to your space conditions
-1 Roller conveyor behind the side system with round belt drive. Drive via geared motor (0.55 kW) with frequency converter v=50 m/min at 50 Hz. Effective width 700 mm Length of roller conveyor approx. 2500 mm. Overall height 1000 mm +/- 30 mm
Rollers D=60 mm with plastic coating, D=125 mm
- 3 driven cross conveyors, each with 8 toothed belts, pitch adapted to your requirements
Side lengths. Drive with geared motor (2x 0.55 kw) and frequency converter, v=40 m/min at 50 Hz. Center distance 1500 mm each, overall dimension in transverse direction: adaptation to your space conditions.
- 1 roller conveyor with round belt drive. Driven by geared motor (0.55 kW) with frequency converter v=50 m/min at 50 Hz. Usable width 700 mm. Length of roller conveyors approx. 2500 mm. Overall height 1000 mm +/- 30 mm. Rollers D=60 mm with plastic cover, D=125 mm
- 1 driven belt conveyor as manual workstation. Drive with three-phase motor and frequency converter v=50- 100 m/min. Height 1000 mm, effective width 800 mm, length approx. 2800 mm
- 1 roller conveyor with round belt drive. Driven by geared motor (0.55 kW) with frequency converter v=50 m/min at 50 Hz. Usable width 700 mm. Length of roller conveyors approx. 2500 mm. Overall height 1000 mm +/- 30 mm. Rollers D=60 mm with plastic coating, D=125 mm
- 1 driven cross conveyor with 8 toothed belts each, pitch adapted to your floor lengths. Drive with geared motor (2x 0.55 kw) and frequency converter, v=40 m/min at 50 Hz. Center distance 1000 mm each, overall dimension in transverse direction: adaptation to your space conditions.
- 1 Control of the conveyor line

Automatic glue application LA - CNC
The basic machine consists of a solid, torsion-resistant frame and a support with precision guides to accommodate the units.
Control cabinet for the machine control (electro-pneumatic control), can be set up separately.

Electrical connection:
400 V +/- 10%, 50 Hz (3 phases with loadable neutral conductor), approx. 5 KW.
In accordance with VDE0100-T482, the system must be protected on site by an RCD.

Service unit:
R 1/2” with pressure switch and air accumulator, operating pressure 6-7 bar

Paint finish:
Machines and control cabinet: pebble gray (RAL 7032)
Protective grille and support: fire red (RAL 3000)
Electrical, pneumatic and other purchased elements according to P+H standard

Workpiece dimensions:
Length: 257 mm 2500 mm
Width: 200 mm 700 mm
Thickness: 16 mm 22 mm
The part width must not be greater than the part length

Working height:
950 mm

Feeding and turning device ZWA-1-CNC
The first incoming side is turned around the transverse axis and lifted, the second side runs through into the carcass press. No additional handling is required for the sides.
The machine consists of a solid, torsion-resistant frame with precision guides to accommodate the lifting table.

Electrical connection:
via carcass press

Compressed air connection:
via carcass press

Paint finish:
Machine pebble gray (RAL 7032)
Supports and protective grille fire red (RAL 3000)
Motors matt black (RAL 9005)
Electrical, pneumatic and other purchased elements according to P+H standard

Workpiece dimensions:
Enclosure height: 257 mm 2500 mm
Enclosure width: 300 mm 1200 mm (250 mm only possible with allowance)
Cabinet depth: 250 mm 700 mm

Working height:
930 mm

Required room height:
min. 3700 mm

KP-6-CNC Carcass press
for base, tall and wall cabinets. With automatic side infeed and electronically positionable holding arms for manual insertion of shelves and rear panel. The shelves are vertical.
The rear panel faces the operator, the stop edge is the rear edge. The bottom shelf points in the outfeed direction. For tall cabinets, the mounting plate side is at the bottom.
The basic machine consists of a sturdy, torsion-resistant frame with precision designs to accommodate the pressing jaws and additional equipment.

Electrical connection:
400 V +/- 10%, 50 Hz (3 phases with loadable neutral conductor), approx. 10 KW.
In accordance with VDE0100-T482, the system must be protected on site by an RCD.

Compressed air connection:
R 1/2” with pressure switch and air accumulator, operating pressure 6-7 bar

Paint finish:
Machine and control cabinet pebble gray (RAL 7032)
Supports and protective grille fire red (RAL 3000)
Motors and suction hood matt black (RAL 9005)

Workpiece dimensions:
Cabinet height: 257 mm 2500 mm
Cabinet width: 300 mm 1200 mm Cabinets < 300 with allowance
Cabinet depth: 250 mm 700 mm
Max. side thickness incl. fittings 56 mm (i.e. with 16 mm side thickness max. fitting height 40 mm possible)

Working height:
930 mm

Required room height:
min. 3700 mm


Note:
The technical data and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.