workpiece return ZHR 15/XX/LI LIGMATECH

workpiece return
Brand: Ligmatech
Type: ZHR 15/XX/LI

The workpiece return enables one-man operation
on edge banding machines.

Workpieces coming out of the machine are
roller conveyor, which transports the parts to a lifting station
promotes.
Via a scissor mechanism the parts are
Upper pressure promoted this to an inclined plane,
consisting of roller rails, transports. On this inclined
roller conveyor, the parts slide by their own weight to the
Operator back.

The driven roller conveyor is equipped with a turning station
the parts coming out of the machine crosswise
rotated by 90 degrees and thus conveyed back longitudinally
can.

To support long transverse arriving parts
an additional support roller track is attached,
which can be folded down when not in use.
Similarly, when not in use, the inclined roller
The return path can be folded vertically upwards,
so that the edge banding machine can be
can be used manually.

From a machine length > 5,000 mm, the feedback control system
an intermediate drive is integrated into the line. Then the
The return path can no longer be folded upwards.

Technical data:
Workpiece dimensions: during rotation crossways/longways:
max. length: 2200 mm 2200 mm
min.: 300 mm 300 mm
max. width: 1000 mm 800 mm
min.: 120 mm 120 mm
Max. thickness: 50 mm 22 mm
Weight max.: 40 kg 30 kg

Part distance: 1000 - 1200 mm 1200 - 1500 mm

Feed speed: infinitely variable 8 - 25 m/min.

operating pressure: 6 bar

Operating voltage: 400 V, 50 Hz

Control voltage: 24 V (according to VDE)


Note:
The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.