Single-sided edge banding machine HOMAG KAL 210 with boomerang LIGMATECH

Single-sided edge banding machine
Make: HOMAG
Type: KAL 210 AMBITION 2264
Year of construction: 2014

One-sided edge banding machine for editing
of straight workpiece edges and for gluing
and post-processing in the longitudinal and transverse pass.

Overview of aggregate equipment:
- Separating agent spray unit
- Joining milling unit
- Gluing unit A20 with 2 rolls
- end trimming unit HL84
- Pre-milling unit BF10
- Form milling unit FK11 manual
- Profile scraper PN10
- Finishing unit

Feed 18 - 25 m/min.
Feed max. with FK11 20 m/min.

Working height 950 mm

Pneumatic connection 6 bar

Total length 7845mm

Workpiece thickness 8 - 60 mm
Edge height max. = workpiece thickness + 4 mm
Edge material roll 0.3 - 3 mm
Edge material strips 0.4 - 20 mm

Aggregate equipment:
- Separating agent spray unit top/bottom
- Joining milling unit
  2 motors each 3 kW, 150 Hz, 9000 rpm.
- Gluing unit A20 with 2 rollers
  consisting of:
  - Workpiece preheating
  - hot-melt adhesive unit
    Melting unit with Basic granulate container
    Melting capacity 6 - 12 kg/h, depending on the
    adhesive used
    Order unit QA65
  - Magazine 2 rolls manual
  - Pressure Zone C
    1 driven feed roller diam. 150mm
    6 squeezing rollers diam. 70mm
    Pneumatic pressure adjustment
    Central adjustment to different edge thicknesses

- end trimming unit HL84 bevel/straight 0.8 kW
  for trimming the excess edges on the front and
  trailing edge
  2 motors each 0.8 kW, 200 Hz, 12000 rpm.
  Pneumatic adjustment for converting from chamfer to
  straight caps

- Pre-milling unit BF10 1.5 kW
  for pre-milling the PVC and flush-milling the solid edges
  2 motors one above the other, each with 1.5 kW, 200 Hz, 12000 rpm.

- Form milling unit FK11 manual
  for processing the edge overhangs on the workpiece
  upper and lower edge as well as for milling around the
  Workpiece front and rear edge

- Profile scraper PN10
  for chamfering or rounding of pre-milled PVC edges

- Finishing unit
  consisting of:
  - Glue joint scraper
  - Buffing unit

- powerControl PC22
  Modern control system based on Windows PC

- Automatic adjustment of the infeed guide on one side

- Sliding carriage

- Workpiece thickness 60 mm

- Workpiece thickness 8 mm

- Pre-installation for Boomerang ZHR05
  Feed lock and mechanical cutting
  job adjustment

- Application unit PU65 (exchangeable)

- Ambition2264/74 bevel/radius automation package
  - automatic pressure zone adjustment
  - Pneumatic adjustment of the trimming motors
    Flush or overhang caps
  - Pneumatic adjustment pre-milling unit to
    Flush or overhang milling
  - Automatic adjustment from chamfer to
    Radius milling in form milling
  - Pneumatic adjustment FA11 for driving away
    from the work area
  - Remote control for setup mode

- HOMAG Group POWERTOUCH control system 

with workpiece returning system
Make: LIGMATECH
Type: ZHR05/L/075
Year of construction: 2014


- with separate preheating station and 3 additional glue settings

Note:
The technical data and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.